ISO SGS iatf CE ul dev

Industry-Use Pipeline Process Temperature Maintenance Electric Heated Tapes

LINTAPE has been an adhesive tape manufacturer since 1997. After decades of development, Lintape has gradually developed and grown. At present, the tapes produced by Lintape have been exported to more than 80 countries around the world.

Lintape's products are considered by many customers as synonymous with good quality and cost-effectiveness. We have a strong production capacity, which can meet almost all customized production of adhesive tapes.

You can leave a message on this website, or send us an e-mail, we will contact you soon and explain to you our strong competitive advantage.

Send us your tape request, we will reply you shortly and provide our quotation.

Click Here to send us an email, or Click Here to chat with us on whatsapp.

Quick inquiry

Lintape Factory

  • Lintape Factory
  • Lintape Factory
  • Lintape Factory
  • Lintape Factory
  • Lintape Factory
Heat Trace (Heat Tracing)

Heat Trace (Heat Tracing)

Heat trace is most commonly seen with the use of electric heating to protect surfaces and piping from freezing, thus preventing fluid flow due to surrounding low ambient air temperatures. When the heat trace systems are not continuously monitored, their failure can create unpleasant surprises that may negatively impact the systems they serve. Trace heating - Lintape Electric heat tracing, heat tape or surface heating, is a system used to maintain or raise the temperature of pipes and vessels using heat tracing beiaardcantusneerpelt.be heating takes the form of an electrical heating element run in physical contact along the length of a pipe. The pipe is usually covered with thermal insulation to retain heat losses from the pipe.

Chat With Us
HTSX™

HTSX™

HTSX self-regulating trace heaters are designed specifically for process temperature maintenance or freeze protection where high temperature exposure capability is required. HTSX withstands the temperature exposures associated with steam purging. Constructed using Thermon’s unique and proven monolithic co-extrusion process, HTSX is the market ... Troubleshooting & Maintenance - Process Heating Solutions VI. Temperature variations from setpoint along pipeline: A. Unanticipated flow patterns or process operating temperatures: A. Redistribute heating circuits to accommodate existing flow patterns; confirm process conditions : B. Inconsistent cable installation along pipeline: B. Check method of cable installation, especially at heat sinks

Chat With Us
Electric Heat Tracing nVent

Electric Heat Tracing nVent

ElectroMelt Self-Regulating Heating Cable. arrow-right. A range of eight compact, touch screen based, single-point heat-tracing controllers for freeze protection and process temperature maintenance in nonhazrdous or Class I, Div. 2/Zone 2 locations. Process Heating For manufacturing engineers who use heat In our August 2021 edition of Process Heating, read our cover story on vibrating fluid-bed dryers, the cost-effective, energy-efficient way to dry and cool products in process heating or cooling applications. Read on about the benefits of heat transfer pumps in high temperature applications and much more!

Chat With Us
XtremeFLEX® Heating Tapes and Cords - Heat Tape

XtremeFLEX® Heating Tapes and Cords - Heat Tape

XtremeFLEX® Heating Tapes and Cords. BriskHeat offers a superior selection of heat trace cable, often called "heat tape" – also known as heating cable, heat tracing cable, or heater beiaardcantusneerpelt.be flexible designs and high temperature capability of XtremeFLEX ® Heating Tapes and Cords provides an ideal solution for your heat tape for pipes and heat wrap tape needs! Applications - Chromalox HWM — Hot Water Maintenance Applications Industrial Process Maintenance Applications When industrial process piping and vessels must be maintained above the ambient air temperature, Chromalox has the heating cable to fit the application. Cables range in the maxi-mum maintenance temperature from 150°F for SRL to 1100°F for MI cables.

Chat With Us
Industrial Electrical Heating for Use in Ex Areas

Industrial Electrical Heating for Use in Ex Areas

The different BARTEC heating systems and technology can be used for all variations of electrical heating applications. Systems with Self-limiting Parallel Heating Tapes BARTEC offers self-limiting parallel heating tapes of types PSBL , PSB , MSB , HSB and HTSB and combinations with connection and termination equipment for various needs of electrical heating applications. Heat Tracing Cable Stripping, Termination, Splicing Electric heat tracing is a cable based system used to maintain, raise temperature and protect process pipework and vessels against freezing temperatures and associated frost damage – heat tracing cables mitigate and counteract cold weather effects as part of a Winterization strategy for industrial and process applications against low (sub-zero) ambient temperatures on both onshore and ...

Chat With Us
Heat Trace

Heat Trace

HTSX™ Self-Regulating Heating Cable. Designed specifically for process temperature maintenance or freeze protection where high temperature exposure associated with steam purging. See Product. Max Operating Temperature Power ON. 240°C (464°F) Max Exposure Temperature Power OFF. 250°C (482°F) W/m @10°C. 10, 20, 30, 39, 49, 66. Heat Trace Design Guide - ARCO Engineering materials for freeze protection or process mainte-nance applications for a piping system or tank. By following the steps in this guide the user can easily select a complete bill of materials for the system, including heating cable, connection accessories, and temperature controls. Thermal Design - Pipes:. . 1 TABLE OF Thermal Design - Tanks:. . 6

Chat With Us
Design, Installation and Maintenance Manual

Design, Installation and Maintenance Manual

temperature of the heater, a process temperature limit, or, if in a hazardous area, the Temperature Class of the hazard. There are three ways of protecting the heat tracing system from exceeding the high-limit temperature:-1. The use of inherently temperature-safe heat tracers (self-regulating trace heaters ... What Is Piping – A Blog to learn Piping, Mechanical, and The PASS/START-PROF is a pipe stress analysis software that has a long history since 1965, see update history. It is industry standard in several countries for power, process, oil and gas pipelines,...

Chat With Us
Heat Tracing Products

Heat Tracing Products

Heating Cable G-2 Electric Heat Tracing Products Chromalox heating cable line includes cables suitable for most process maintenance, pipe and vessel freeze protection and roof and gut-ter de-icing applications. Industrial Heating Cables are ideal for process maintenance applications. Maintenance temperatures up to 1100°F can be achieved in Temperature maintenance through trace heating for tanks Temperature maintenance during storage and transport; Temperature maintenance: 40 – 45 °C; Temperature tolerance: +/- 3 °C; Temperature maintenance for smooth emptying; Temperature monitoring and control; References. August Storck KG; Sollich KG; Hosta Schokolade Spezialitäten GmbH; Lorenz Bahlsen Snack World; Ferrero; ZENTIS GmbH & Co. KG

Chat With Us
FOR SELF-REGULATING HEATING CABLE

FOR SELF-REGULATING HEATING CABLE

HTSX™ Designed for process temperature maintenance or freeze protection applications up to 302°F (150°C) and intermittent exposure temperatures (power-on or off) of 482°F (250°C), and continuous exposure (power-off) to 400°F (204°C). The cable is capable of withstanding the exposure temperatures associated with steam purging. Self-Regulating Medium Temperature/ Enhanced Heating Cable • UL listed for use on fire protection system piping Description Chromalox SRM/E self-regulating heating cable provides safe, reliable heat tracing for process temperature maintenance and freeze protection of pipes, valves, tanks and similar appli-cations. Constructed of industrial grade 14 AWG buss wire with metal braid and optional ...

Chat With Us
Pipe Heater - Wattco

Pipe Heater - Wattco

WATTCO™ Pipe Heaters are especially constructed to fit inside standard 2 or 3” schedule 40 NPS pipes. These industrial tank heaters are specifically designed for usage in tanks that require extremely low watt densities such as waxes, thick liquids such as tar, molasses and corrosive mediums. Installation & Maintenance - Emerson Electric How Heating Systems Work An electric heating cable system uses the heater cable to replace the heat that is lost through the thermal insulation system. Replacing the lost heat allows the pipe and product inside the pipe to be kept at a constant temperature.

Chat With Us
Powerblanket Industrial Heating Blankets Total

Powerblanket Industrial Heating Blankets Total

Powerblanket provides the most comprehensive industrial heating and cooling solutions to reduce waste, cut costs ... (IRR). For my demonstration, I tried to bring the IRR up to a workable temperature by using a forced air ceramic heater. The product did not perform well and overheated 40°F / 22°C above the ... Electric Process Heaters. Trace Heating Cables Heat Tracing - Heating and Process Trace heating cables provide freeze protection and temperature maintenance (or heating) to pipes – commonly referred to as electric heat tracing, surface heating or heat tracing cables they are used to protect mechanical services (pipes, vessels, tanks, hoppers, valves, drums) against cold weather damage by sub-zero temperatures and frost conditions.

Chat With Us
The Key to Reliable Electrical Heat Tracing is Proper

The Key to Reliable Electrical Heat Tracing is Proper

Where Q equals the quantity of heat, U is a heat transfer coefficient, A is the Area, and T1-T2 is the temperature difference. The Institute of Electrical and Electronic Engineers (IEEE) provides a more accurate, though complicated, heat loss formula (see Figure 3) by adding in pipe heat loss and other secondary factors. Self-Regulating Medium Temperature/ Enhanced Heating Cable Chromalox SRM/E self-regulatingheating cable provides safe, reliableheat tracing for process temperaturemaintenance and freeze protection ofpipes, valves, tanks and similar appli-cations. Constructed of industrialgrade 14 AWG buss wire with metalbraid and optional overjacketing,SRM/E ensures operating integrity inmost hostile industrial beiaardcantusneerpelt.be 420°F (215°C) maximum exposuretemperature rating allows steamcleaning of process equipment ...

Chat With Us
XtremeFLEX® Heating Tapes and Cords - Heat Tape

XtremeFLEX® Heating Tapes and Cords - Heat Tape

Our flexible designs and high temperature capability of XtremeFLEX ® Heating Tapes and Cords provides an ideal solution for your heat tape for pipes and heat wrap tape needs! Heat tape and cords can be used on any surface or body, such as wrapping pipes, requiring fast and efficient direct contact heating, with maximum exposure temperatures up to 1400°F (760°C). Design, Installation and Maintenance Manual Maintenance of electric heat tracing systems shall conform to all IEC requirements for the use of electrical equipment and with the requirements of the relevant heat tracing standard, usually either IEC 62395 Electrical resistance trace heating systems for industrial and commercial applications or IEC 60079-30 Explosive atmospheres - electrical

Chat With Us
Industrial Process Heating

Industrial Process Heating

Industrial Process Heating Overview 23 Industrial process heating operations are responsible for more than any other of the manufacturing 24 sector’s energy demand, accounting for approximately 70% of manufacturing sector process energy end 25 use (see Figure 1) [2]. There are a wide range of process heating unit operations, and associated Make the Most of Electric Tracing Chemical Processing The disadvantages are: 1) not as high a temperature is possible — tracing with steam can provide the highest temperature, followed by electric and then heating oil; 2) skilled installation is required because of lower heat flux — tracing must be carefully banded to the surface being heated; 3) 120/240/480-V AC power isn't intrinsically safe — electric tracing is suitable for Class 1 ...

Chat With Us
Trace heating for underground LNG tanks - frost-free

Trace heating for underground LNG tanks - frost-free

The pipeline network of the LNG plant with all drums and pumps is heated to +10° C for freeze protection. Also, process temperatures between 15 °C and 140 °C are maintained to ensure that the gas liquefaction process runs smoothly and safely. Heat Trace Control Panels - Industrial and Process Heating Available with line sensing or ambient sensing thermostat options. ProTherm SZ Series Heat Trace Panels feature a digital display process controller designed for easy programming. Our control panels feature a low temperature alarm and a sensors break alarm. LED lights provide indication of power to the unit, heater power on and alarm status.

Chat With Us
Heat Tracing Products

Heat Tracing Products

Industrial Heating Cables are ideal for process maintenance applications. Maintenance temperatures up to 1100°F can be achieved in a variety of hazardous and corrosive environ-ments. Industrial Cables include: SRL — Self-Regulating, Low Temperature SRP — Self-Regulating Process Maintenance SRM/E — Self-Regulating, Medium Tempera- ture Enhanced Temperature maintenance through trace heating for tanks Heating Cables and Heating Tapes. Self-regulating Heating Cables. Mineral ... uninterrupted heating chain for temperature maintenance on pipes, valves, pumps, vessels, silos, processing plants, sampling and ... this can block the sensitive devices and disrupt the production process. It is the task of electrical heat tracing to keep chocolate ...

Chat With Us
Pipe Heat Tracing Solutions

Pipe Heat Tracing Solutions

Electric heat trace can be used to provide consistent temperature in pipes and tanks of all sizes in many different applications. Thermally protected pipes can keep product at a constant temperature while being transferred to different process through pipes and can reduce the tank heating costs as the incoming material does not create a thermal drag on the process. Electric Trace Heating, Tyco Trace Heating, Raychem Trace Electric trace heating is a system used to maintain or raise the temperature of pipes and vessels. Trace heating takes the form of an electrical heating element run in physical contact along the length of a pipe. The pipe must then be covered with thermal insulation to retain heat losses from the pipe.

Chat With Us
Self-Regulating Heating Cable

Self-Regulating Heating Cable

fers heating cables specifically designed, manufactured and approved to cover a wide range of applications. BSX™ . . . Designed for freeze protection and temperature maintenance at or below 150°F (65°C), BSX is well-suited for both metallic and nonmetallic piping and equipment. VSX™ . . . Designed for process temperature maintenance or Industrial Heat Trace nVent nVent TRACER is a global solutions expert in high quality electric heat management systems with the ability to provide engineering design services, procurement and fabrication, site services and post installation services anywhere in the world. We understand the specific needs of your individual project and your business and in return will ...

Chat With Us
Heat Tracing In Piping: Types, Working, Use, Installation

Heat Tracing In Piping: Types, Working, Use, Installation

An industrial heat tracing tape should possess the following characteristics: Heat tracing tapes should flexible to easily wrap around the pipe or equipment. Heating tapes should provide very close contact with the pipe material for higher efficiency of heat transfer. Heat tracing tapes should be fast in heating. The Key to Reliable Electrical Heat Tracing is Proper Oftentimes, sulfur pipeline electrical heat tracing systems are deployed that use Distributed Temperature Sensing (DTS). Current DTS technology uses a “glass fiber” with temperature- sensitive characteristics. An Optical Time Domain Reflectometer (OTDR) provides the temperature as a function of distance along the pipe.

Chat With Us
Noir ruban d'isolation électrique en pvc 50m Personnalisé Adhésif PVC Tissu Ruban Adhésif Jumbo Rouleau

Noir ruban d'isolation électrique en pvc 50m Personnalisé Adhésif PVC Tissu Ruban Adhésif Jumbo Rouleau

Rechercher les fabricants des Adhésif Pvc Électronique Bande … Rechercher des fabricants et fournisseurs des Adhésif Pvc Électronique Bande Jumbo Rouleau produits de Adhésif Pvc Électronique Bande Jumbo Rouleau qualité supérieure Adhésif Pvc Électronique Bande Jumbo Rouleau et à bon prix sur Lintape Rechercher les fabricants des Ruban Adhésif Noir produits de … Vous avez également le choix entre un pvc, un bopp et un kraft ruban adhésif noir, des avertissement , des scellement de cartonnage…

Learn More
Underground Detectable Warning Tape with S&S Waved Wire

Underground Detectable Warning Tape with S&S Waved Wire

Detectable warning tape for underground pipeline protection Home Detectable Underground Warning tape. Detectable underground warning tape is the innovative solution to marking below pipework, cables and systems to lower cost, time wasting and increase safety. Our UK based factory manufacture in house, giving us control of quality from start to finish. Our tape complies with ENA TS 12-23 : Issue 3 2013. pe underground electrical cable warning tape Underground Warning Tape Brady BradyCanada.ca…

Learn More
adhesive pvc tape pillow packaging machine

adhesive pvc tape pillow packaging machine

Efficient adhesive tape packaging machine - Lintape Semi Automatic Adhesive Tape Carton Box Packaging Folding Sealing Sealer Packing Machine Range of application: Apply to beverage, dairy, pharmaceutical, electronic audio and video packaging, cosmetics and other products. case maker machina Advantages: The device is a bottle of transmission with the bottle-lined, and the packaging is a bottle link to The servo control motor drives the bottle ... Automatic Adhesive Tape Carton Box Packaging…

Learn More
LSF LSZH fr XLPE INSULATED Multicores Steel Tape Armoured POWER CABLE

LSF LSZH fr XLPE INSULATED Multicores Steel Tape Armoured POWER CABLE

LSF LSZH fr XLPE INSULATED Multicores Steel Tape Armoured … XLPE insulated PVC sheathed steel wire armoured… LSF insulated, armoured and sheathed, multi-core power cable. … in the armour, swellable tapes under and over armour, steel tape armoured cables etc. … EEMUA 133 Multicore, XLPE, lead sheathed, PVC, SWA, PVC, Control cable for. ….. LSF LSZH fr XLPE INSULATED Multicores Steel Tape Armoured … XLPE Insulated PVC Sheathed Cables (IEC 60502-1), Copper. … (Single core cables shall be Aluminium…

Learn More
Hot Selling cheap shiny PVC plastic black insulation electrical insulating tapes

Hot Selling cheap shiny PVC plastic black insulation electrical insulating tapes

shiny pvc electrical tape, shiny pvc electrical tape black pvc insulation tape, black pvc insulation tape Pvc Black Insulation Tape Insulating Pvc Electrical Pvc Insulation Tape Hot Selling Shiny PVC Plastic Black Insulation Tape Electrical Insulating Tape $0.04-$0.05 / Piece 50000 Pieces (Min. Order) PVC Electrical Insulation Tape, PVC Electrical Insulation Hot Selling shiny PVC tape manufacturer High Quality PVC black insulation tape electrical insulating tape China Shiny Pvc Electrical Tape…

Learn More
Email